|
|
Ultimate Sports Cage
Jeep CJ8 Scrambler
1979 - 1986
Shown without the rear Sport Cage
Patented
This is the main Sports Cage which includes a rear hoop that fastens to the Jeep CJ8 Scrambler factory bar threw the same hole in the hard top as the shoulder belt mounts. All Sport Cages are complete bolt-in, you do not remove any of the factory sport cage to install our unit! This means no drilling, no welding. Fits half cab and full hard tops and soft tops.
Parts Included with this kit:
• The top T-section
• Windshield side bars with handles
• Bar across the dash
Ultimate Sports Cage
Jeep CJ8 Scrambler 1979 - 1986
Unpainted
Part # RH1005
$659.95
Features
|
 |
 |
All connections to the Jeep CJ8 Scrambler factory bars are with ½" thick CNC machined clamping collars, with six- 5/16 x 1" grade 8 socket head cap screws. All tubing is 1-3/4 x .120 wall.
Rear hoop mounts to the 4 bolts at the lower corner inside the cab.
Note the clean looking clamping collars! |
 |
 |
Notice that the Sport Cage does not affect the Jeep CJ8 Scrambler factory windshield mounting, sun visors or top latches.
The windshield can still be folded down by removing the top 2 bolts at the dash brackets. Sun visors can be moved in about 1-1/2" and remounted allowing normal use. |
 |
 |
Top view shows front top bar & 2 center bars w/a 14 gauge plate between them. We do this for strength and for the off road enthusiast that wishes to install a CB radio or a DOME LIGHT. |
| |
 |
The shoulder belts now fastens to the new hoop with the bolt extending into the Jeep CJ8 Scrambler factory bar. Early Scramblers can now install factory shoulder belts. |
Optional Components
|
 |
 |
We now offer the Ultimate Rear Sports Cage for CJ-8 Scramblers which is made of
2" x .120 Tubing. |
 |
 |
|
 |
 |
|
 |
 |
|
 |
 |
For greater protection, we offer optional optional Floor Brackets (RH1003-F) that mount behind the dash, extends down to a plate on the floor, a plate under the floor and then sandwiched together using 3 grade 8 bolts. This bracket fits inside the door post channel so snug to the body that it does not interfere with the use of the emergency brake or release handle. |
 |
 |
For maximum protection, we offer Frame Bracket Mounts (RH1002-G) that attaches to the floor of your Jeep with 3 grade 8 bolts, sandwiching the floor plate. Tubing extends to the frame with a bushing and bracket at the frame. Two 1/2" holes will have to be drilled in the frame to mount the bushing bracket. |
| |
|
|
|
| |
