|
|
Ultimate Sports Cage
Jeep CJ7
1979 - 1986
Without Rear Bar
Patented
This is the main Sports Cage which includes everything from the Jeep CJ7 factory bar forward to the dash and it fits hard tops or soft tops.
Dash brackets are mounted with 3 bolts at the triangle shaped plate and the other 3 bolts down the door post on both sides of your Jeep. All Sport Cages are complete bolt-in, you do not remove any of the factory sport cage to install our unit! This means no drilling, no welding. The Sports Cage fits Soft and Hardtops. All hardware is included.
Parts Included with this kit:
• The top T-section
• Windshield side bars with handles
• Bar across the dash
Ultimate Sports Cage
Jeep CJ7 1979 - 1986
Unpainted
Part # RH1003
$559.95
Features
|
 |
 |
All connections to the Jeep CJ7 factory bars are with ½" thick CNC machined clamping collars, with six- 5/16 x 1" grade 8 socket head cap screws. All tubing is 1-3/4 x .120 wall. |
 |
 |
Notice that the Ultimate Sport Cage does not affect the Jeep CJ7 factory windshield mounting, sun visors or top latches.
The windshield can still be folded down by removing the top 2 bolts at the dash brackets. Sun visors can be moved in about 1-1/2" and remounted allowing normal use. |
 |
 |
Top view shows front top bar & 2 center bars w/a 14 gauge plate between them. We do this for strength and for the off road enthusiast that wishes to install a CB radio or a DOME LIGHT. Angled rear bars tie the whole SPORTS CAGE together.
Rear side bar, angle bar kits and straight across the rear bar sold separately. |
 |
 |
Note the clean looking dash mounted windshield frame with handles to help you get in and out of your Jeep CJ7. The crossbar just above the dash is for extra strength! |
Optional Components
|
 |
 |
For greater protection, we offer optional
optional Floor Brackets (RH1003-F) that mount behind the dash, extends down to a plate on the floor, a plate under the floor and then sandwiched together using 3 grade 8 bolts. This bracket fits inside the door post channel so snug to the body that it does not interfere with the use of the emergency brake or release handle. |
 |
 |
For maximum protection, we offer Frame Bracket
Mounts (RH1002-G) that attaches to the floor of your Jeep with 3 grade 8 bolts, sandwiching the floor plate. Tubing extends to the frame with a bushing and bracket at the frame. Two 1/2" holes will have to be drilled in the frame to mount the bushing bracket. |
|
| |
