Rock Hard Front Bumper
Jeep Cherokee XJ
Patent Pending
Rock Hard Cherokee XJ Front Bumpers are made out of
3/16" x 2" x 5 " thick tubing in the center and with outter edges that are made of 1/4" plate. This bumper comes pre-drilled to accept a bolt on winch plate made by Rock Hard 4x4 Parts. It also comes with (2)-5/8" x 2-1/2" CNC D-Ring shackle mount with tabs that are welded on front, go through bumper and then welded on the backside too.All needed hardware is furnished for installation.
The Rock Hard Cherokee XJ Front Bumper has a clean installed look as though it came this way from the factory. The outter edges are made out of 1/4" steel plate.
The optional bolt on winch plate with built-in fairlead mount is made out of 1/4" steel plate and the mounting brackets are made out of 1/2" steel plate which are secured in place with 4 - 7/16" Grade 8 Bolts.
The Rock Hard Cherokee XJ Front Bumper is designed with a beveled bottom edge which provides a greater approach angle. The optional bolt on winch plate extends this angle to create a clean and continuous ramping surface.
Here are 2 additional views of the Rock Hard Cherokee XJ Front Bumper from afar and from underneath.
View of the Rock Hard Cherokee XJ Front Bumper complete with winch mounted.
Close up view of the Rock Hard Cherokee XJ Front Bumper complete with winch mounted.
